Waterjet Cutting System Model Number: WC5WA6030H

420Mpa (60,000 psi), 10ft x 20ft (3000x6000mm)

The high pressure pump:

Full abrasive waterjet cutting system consists of high pressure pump, cutting table with hopper, and CNC controller.

Pump type	dual plunger reciprocal intensifier
Maximum  pressure	400Mpa (60kpsi)
Pump cooling method	forced water flow, electrical chiller is optional.
Maximum water flow rate	3.5L/minute (0.8Gal/min)
Water Filter	2-stage water filtration included.
Minimum supply water pressure to pump	70psi (5kg/cm2)
Approximate size	60" x 36"x 55"(1600 x900 x1400mm), weight 1100kg
Power source	3 phase, 380VAC, 50Hz  (or 220V 60Hz),220VAC or 60Hz (380VAC, 50Hz)
Pump cooling method	water. Oil chiller is optional
Motor starting current requirement	160Amp
Protective automatic shut off under the following circumstances	Over pressure limit
	Over temperature limit

CNC cutting table:

The table consists of water tank, X-Y motion system, Z axis motion, cutting head assembly, and abrasive reservoir with adjustable abrasive feed control. Overpass style.  Cutting table working area size: 10ft x 20ft (3000x6000mm).   Water tank is made of stainless steel.                                

X-Y motion system consists of servo motor and driver, ball screw and precision linear guide. Z-axis motion is driven by AC motor with speed reducer. X-Y position accuracy is 0.06mm, repeatability is 0.03mm. Over all cutting accuracy is at max 0.10mm. This machine can cut all kinds of metal, marble, granite, glass, ceramic tile, rubber, plastic, virtually any materials. This machine can cut metal up to 100mm thick. Under water cutting is available with this model to reduce noise and splash.

Cutting head
	Pneumatically operated on/off valve, self-aligned cutting head. Maximum Abrasive flow rate:  0.5kg/min (1lb/min). Compressed air source is necessary. An air compressor is optional item from manufacturer. As an option, the cutting head can manually tilt in both x and y directions.

                                                   

 

Controller Tower                                                       Remote Control

 

 

DXF file compatible:

 

The controller is compatible to dxf file format. Users can save design drawing in .dxf from AutoCAD and read the file into the controller. Controller will post the dxf file to G-code.  The controller can also read G-code generated from other CAM software. Controller software interface is based on Microsoft Windows 98/XP/VISTA. Both metric and British unit versions are available.

Advanced CAD/CAM software (optional):  for design drawing, define machine path and lead in/out, nesting, tool offset, and generate G code. Features are similar to AutoCAD, and with rich features of CAM.

 

Automatic abrasive feeder:

 

This equipment is highly recommended for large tables
	Requires 70psi pneumatic source
	Capacity 40 Gallon.
	Self detecting empty/full status of reservoir and start/stop feeding.
	Model number ADS-04-170

Accessories included in standard package	Spare parts kit (optional)
High pressure tubing	Including 10 nozzle, 20 orifice, 1 HP seal kit, 1 LP seal kit, 1 HP cylinder, 1 check valve body, 1 check valve repair kit, 1 on/off valve repair kit.
Water hose
Electrical cable
1 pcs nozzle, 2 pcs orifice, 1 tube of blue goop.
1 set of special tools for pump maintenance.